Here we have the Megasquirt 2 V3 the main difference from the MS1 V3 is the MS2 Daughter Board in place of the MS1 Chip, so can do all the MS1 can do and a lot more, for all the details have a good read of the MS Extra Manuals (link above).

To help you choose which MS here is a link so you can compare the differences between MS1, MS2, and MS3

http://www.msextra.com/feature-xref.html

To order or pay for items we accept Paypal which is a secure

way to pay and

they accept most Credit Cards, or you can pay by direct Bank Transfer, or you can pay by cheque.

To Pay all you have to do is log on to www.paypal.co.uk and pay sales@megasquirtuk.co.uk Thanks.

Col1


       Megasquirt 2 V3

MS 2 V3


MS 2 V3 unassembled Kit £375.00 + Shipping + VAT.

MS 2 V3 Fully assembled, 2.5 Bar MAP sensor, good for normally aspirated or Boosted Engines to 30psi max, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc,Price £445.00 + and Shipping + VAT.

MS 2 V 3 Extra Code fully assembled, 2.5 Bar MAP sensor, good for normally aspirated or Boosted Engines to 30psi max, modified to run the Ford Edis module and coil pack so will run a 4,6 or 8 cycl wasted spark + your Fuel Injection, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc, Price £465.00 + and Shipping + VAT.

BTT

MS 2 V 3 Extra Code fully assembled, 2.5 bar MAP sensor, 2.5 Bar MAP sensor, good for normally aspirated or Boosted Engines to 30psi max, and fitted with 2 coil drivers so will run a 4 cycl wasted spark, this is the recommended way as you have complete control of the timing and can also use the onboard rev limiting facility, + your Fuel Injection, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc, Price £475.00 + and Shipping + VAT.


Mazda MX5, Miata, Eunos.Megasquirt 2 V3 Extra code loaded, fully assembled, 2.5 bar MAP sensor,  good for normally aspirated or Boosted Engines to 30psi max,  due to popular demand I have now got all the mods done to run the CAS system and the OE coils + your Fuel Injection,so all you have to do is wire it in and tune, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc, Price £525.00 + Shipping + VAT

Adapter Cable as fitted above Eunos 1600cc 1990 this allows you to remove OE ECU and insert OE loom plugs to one end and Megasquirt DB37 to the other end, also includes a short Jumper to insert to MAF plug so you can drive your Fuel Pump through the Adapter cable, £125.00 + Shipping +VAT

(Img 1) (Img 2)

If you want to make your own adaptor cable to connect direct to your loom plugs I can supply the 76 pin socket for £25 + VAT

Here is a good link to help with the wiring http://www.miataturbo.net/useful-saved-posts-8/how-make-install-

your-own-diy-megasquirt-13676/ 

BTT

Megasquirt 2 V3.0 Extra Code loaded, fully assembled, 2.5 Bar Map Sensor,  good for normally aspirated or Boosted Engines to 30psi max,  has got 2 Coil Drivers fitted so can run 4 Cycl Cops in wasted spark mode, they are VW 4 wire COPs which are not included, so ideal for your VW Golf or Audi 20 Valve, or as I have also tried the COPs on my Vauxhall 20XE engine, and all run fine looks a lot better than the old coilpack so chuck that old Distributor and coil pack, + your Fuel Injection, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc, Price £475.00 + and Shipping + VAT .

Megasquirt 2 V3.0 Extra Code loaded, fully assembled, 3 Bar Map Sensor, good for over 30 PSI boost, has got 2 Coil Drivers fitted so can run 4 Cycl Cops in wasted spark mode, they are VW 4 wire COPs which are not included, so ideal for your VW Golf or Audi 20 Valve. Or as I have also tried the COPs on my Vauxhall 20XE engine, and all run fine looks a lot better than the old coilpack so chuck that old Distributor and coil pack,+ your Fuel Injection, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc, Price £535.00 + and Shipping + VAT.

BTT

Here we have the ultimate Megasquirt 2 V3 Extra which has been modified to run fuel and spark fully sequential for any 4 cycilinder Turbo or supercharged engine, also fitted with MapDaddy 4 bar Map sensor with constant Barometric pressure sensor as well, comes with a set of 4 - 2 wire COP's, comes with a resonable MAP to get you up and running, wiring diagram you can download from this site (Link), DB37 Plug, and DB9 cable to connect to your pc, Price £745.00 + Shipping + VAT.

Tested this on my Astra GTE 20XE and runs fine,got a resonable Map to get you up and running.

(Img 1 ) (Img 2 ) (Img 3 )


New Black Case with end plates for MS1 V3 or MS2 V3 Price £50.00 + Shipping + VAT

Megastim V2.2 Price (Fully Assembled) £95.00 + VAT

As above unassembled Price £75.00 + VAT

Bluetooth Adaptor for your Megasquirt 1,2 or 3 with 1 Mtr Cable to plug straight into your DB9 socket so you can run Shadow Dash on your Android Tablet all set ready to go, Price £65.00 + VAT

Jaws Wideband Controller with a digital display fully assembled Price 245.00 + Shipping and + VAT

BTT

Manifold Air Temp Sensor ( Open Element) with Plug &Tails ( calibrated for MS) Price £27.50 + and Shipping + VAT

Manifold Air temp Sensor (Open Element) not calibrated for MS so you will have to calibrate with Easytherm, Price £22.50 + Shipping + VAT.

CLT or water temp sensor with plug and connectors, closed element type, calibrated for Megasquirt, Price £24.50 + Shipping + VAT

USB Adapter ( That works with Megasquirt) Price £26.50 + and Shipping + VAT.

BTT

5 Foot Labeled Wiring loom ( all labels printed) with DB37 plug already installed and Light Weight Plastic Hood ( so will not damage your MS DB 37 pins when racing on or off road ) Price £115.00 + and Shipping + VAT.

1.5 foot ( 460mm) Wiring Pigtails ( all labels printed) and DB37 Plug with Light weight Plastic Hood ( ideal for racing or off road enviroments) suitable for MS 1, 2 or 3 Price £65.00 + VAT

DB37 Plug with 8 inch Tails ( all labels printed) Price £30.00 + VAT

Or if you want to make your own short or full loom as above I sell the DB37 pin Female solder cups on their own. Price £5.50 each,with solid Metal Hood £6.50, or if you want the light weight plastic hood Price £3.00 each.

BTT

  MS 2 Chip Extra Code Loaded Price £125.00 + VAT

MAP Sensor 2.5 Bar Price £25.00 + VAT

MAP Sensor 3 Bar Price £50.00 + VAT

Map sensor 4 Bar Price £95.00 + VAT

BTT

 2 Mtr Beldon Shielded cable Ideal for VR Sensor Price £12.50 + VAT

DB9 Serial Cable 2Mtr ( 6ft) Price £7.50 + VAT

DB9 Cable for Workshop 5 Mtr Price £12.50 + VAT

USB Adapter (that works with Megasquirt) Price £26.50 + VAT

BTT

Ignition Coil Driver Kits BIP 373 these are the best ones to use if you are replacing or modifying your Megasquirt 1,2, or 3 Price £21.50 + VAT

Good used Coil Packs 4 cycl £45 6 cycl Price  £75.00 + VAT

Good used TPS Price  £45.00 + VAT

Good used Bike Injectors Price  £45.00 each + VAT

Aluminium Extrusion to make your own injector rails 4 cycl Price £85.00 + VAT

As above for 6 cycl Price £110.00 + VAT

BTT

We also carry a sellection of Bike Throttle Bodies sizes from 32mm to 42mm

We can also Program Blank or Corrupted MS 1 Chips.

Terms: Cash, Postal Orders,Cheques, PayPal. PayPal can accept most Credit/Debit cards, or you can pay by direct Bank Transfer.

To Pay all you have to do is log on to www.paypal.co.uk and pay sales@megasquirtuk.co.uk Thanks.

We can also supply all spares to repair or modify etc.

 Thanks for looking and happy squirting, any questions call or email me . Regards Eddie Walsh


BTT